Problem adding dropwise to the existing irrigation system?

I am a newbie and try to add a drip sprinkler system waters in my garden. This system has a vacuum suction valve and the plan is to use. I'm going to Home Depot and has a pressure filter, regulator, and 3 / 4 "to 1 / 2 swivel and 1 / 2 inch pipe. Now the anti-siphon valve a few inches above the ground. And if I can connect the 3 components above all, is 90-10 cm long, I have to dig a foot or more in the first anti-siphon to get this online? (I did that, but something tells me I can be wrong.) Is necessary to apply the PVC glue kind of thing when driving in different components? (They seem to escape otherwise, no matter how tight you have to twist. Esp link between Y-filter and pressure regulator and the relationship between the pressure regulator swivel) Thanks! Vivek

I would siphon tube with a valve so that no damage is on the ground. suction valves need to be themselves high above the ground. for all nipples Teflon paste or tape to seal it. I have found the best Teflon paste works well. and all hydraulic connections use regular PVC glue. can use the first purple first, but not necessary. I really do not drip much, but do not use suction valves around where I work. Rarely seen, but more often located above the ground. or all of our stuff, drop by drop, as the pressure reducing valve is installed under usually land in valve boxes. but good luck and hope this helps.

Mr. Heater 75,000 BTU 12-Foot Propane Hose Assembly #F273702 $23.33 12′ Propane hose assembly with hand tightened swivel on both ends, 1″ 20 Male Throwaway Cylinder Thread x POL With Handwheel. Connects 5- pound to 20-pound propane tanks to disposable propane cylinder appliances. Rubber hose and metal hand tighteners….

Watts 25P-0608 Poly Alloy PEX Faucet Swivel Adapter 3/8-Inch Barb x 1/2-Inch Female Pipe Low-Lead $1.64 Poly alloy (plastic) barbed PEX FPT (Female pipe thread) adapter for use with PEX pipe. Secured to PEX pipe with either stainless steel CinchClamp and Cinch Tool or copper crimp rings and crimp tools (not included) Use nonstick tape on threads. Do not use any pipe dope or thread sealing compound. Bagged….

10 each: Anderson Swivel Flare Connector (ABUS4-6) $33.99 Sold as one unit. (1 unit = 10 each.) Yellow brass. 3/8″ Flare x 3/8″ Flare. Can be assembled and re- assembled, resists mechanical pull out. Compatible with copper, brass aluminum and steel hydraulic tubing. Used on low, medium and high pressure lines. -65 to +250 Deg. F. Bagged. Manufacturer number: ABUS4-6. SKU #: 47211. Country of origin: (TBA). Distributed by Anderson Fittings….

Oxygen Tubing Swivel Connector $4.99 …

Oxygen Tubing Swivel Connector Kinking Releaser $4.99 …

Special 1 Pack of 5 – Tubing Swivel Connector SLT1220 salter labs $12.91 Plastic swivel connector eliminates twisting, tangling and kinking of oxygen tubing. Latex free….

Medline Adaptors and Connectors – Connector, oxygen tubing, 360 degree swivel – Qty of 25 $42.05 Medline offers a variety of adaptors and connectors to meet your respiratory and anesthesia needs….

PAC Iisimple USB-2.0 Cable For Charging&Syncing Ipod/Iphone/Ipad Supports 180 Degrees Swivel $23.79 180 degrees of Swivel, for More Convenient Cable Routing….

Oxygen (O2) Swivel Connector Male/Male, 10 p/pk $39.95 The Oxygen Swivel Adaptor increases freedom of movement by eliminating tangling, twisting and kinking of oxygen tubing. The Swivel Adaptor is placed between the cannula and the oxygen tubing replacing the standard connector, but can also be attached at the source….

Polaris Pool Hose Swivel for Model 180 280 380 D20 D-20 $5.05 New Polaris hose swivel for models 180, 280, or 380 POLARIS pool cleaners in original Polaris package. These are original factory service parts, brand new and sealed in individual Polaris packages. D20…